TOYOBO

Films & Functional Polymers

Materials for Printing in Japanese

Cosmomask®

Cosmomask®

Toyobo, the pioneer of Printight®, a water–wash letterpress plate, has commercialized an instant thick–layer photo–polymer film Cosmomask® used for screen printing.
This thick–layer photo–polymer film makes the preparation of screen film much easier compared with the conventional process.

Key advantages

  1. Put the film onto the screen fabric. Then apply the photo-sensitive emulsion to the squeeze side of fablic. Then PS plate for screen printing is ready. Possible to decrease processing time drastically, compared with direct screen method of emulsion.
  2. High photo-sensitivity makes UV exposure time shorter than that of conventional diazo-type screen film.
  3. Life time is long enough to last for approximately 1 year under dry condition.
  4. Water-wash and high resolution.
  5. Flat film surface realizes an excellent printing quality.
Structure of plate

Structure of plate

Grade(Thickness) & Size

Grade Photo-sensitive layer thickness (µm)
(±)15µm
Available size
TF10E 100 A-2 (420mm×594mm)
TF15E 150
TF20E 200
TF25E 250
TF30E 300
TF35E 350
TF40E 400

Plate–making process

Put the film onto the screen fabric. Then apply the photo-sensitive emulsion to the squeeze side of fabric. Then PS plate for screen printing is ready. Possible to decrease processing time drastically, compared with direct screen.

Plate–making process

Get Adobe Reader

The Adobe Acrobat Reader is required to view PDF documents.

Back to top

All products are produced with a quality control system as certificated by "ISO 9001" for the world.

All products are produced with a quality control system as certificated by "ISO 9001" for the world.

Copyright(C) 1996-2013 TOYOBO CO., LTD. All rights reserved.