TOYOBO

Films & Functional Polymers

Materials for Printing in Japanese

Printight® Y type

Plate–making manual

Printight® Y type

Printight® Y type is a product that has been developed for sign application.
It is used by itself as a sign plate, after plate–making process and painting on the surface of the plate.

Key advantages

1 Clear photopolymer

Plate can be processed and decorated freely and the possibility of the creative design is extended.

2 Fine image reproduction

Due to faithful image reproduction to negative film, plate can be used for various designs.

3 Easy, quick, safe plate–making

It can be made with regular plate–making equipment of Printight®.

Processing Times
Face exposure
(chemical lamp)
3'–5' *1
Washout 2'-2'30" *2
Drying 10'(60–70℃)
Post exposure a little bit longer than face exposure time

*1 Exposure time, which depends on the kind of lamp, lamp age and image characteristics, should be re–adjusted for optimum plate quality.
*2 Water temperature 25℃(77℉).

Description

Grade Gauge
mm(inches)
Base
mm(inches)
Use example
YA125J 1.25(0.049) Aluminum back
0.4(0.016)
Room plate
Number plate
Guide plate
YF95C 0.95(0.037) Polyester film
0.25(0.010)

Plate–making process

It can be made with regular plate-making equipment of Printight®.

Plate–making process

Get Adobe Reader

The Adobe Acrobat Reader is required to view PDF documents.

Back to top

All products are produced with a quality control system as certificated by "ISO 9001" for the world.

All products are produced with a quality control system as certificated by "ISO 9001" for the world.

Copyright(C) 1996-2013 TOYOBO CO., LTD. All rights reserved.